Useful Home Products Will Help Your House Sale Profits
December 1, 2008
Even if you’ve never been involved in the sale of house before and yours is about to go on the market, you probably know enough about the process to be able to repeat, like a litany: clean it; paint it; fix it. But do you find yourself asking: How clean does the house have to be and how do I tackle the job? Do I really have to paint? What are the best colors to choose? What do I need to repair? When considering these questions, it’s good to remember that most prospective home buyers are an unimaginative lot. Your house may be immaculate but if the rooms are cluttered, crowded, and dark, they may appear to be less clean and much smaller than they really are. Picture this: an old, seven-piece mahogany dining room suite plus a rocking chair and seven boxes of books packed in anticipation of your move are wedged into a dark green room with a brown rug and a window covered by heavy velvet drapes. Why is this decorating scheme a mistake? It’s because most people are unable to imagine how big and beautiful the room would look if painted off-white, everything removed but the dining room suite, a pastel tablecloth and a fresh flower centerpiece on the table, curtains stripped from the window, the rug removed, and everything spotlessly clean. In the words of Captain Jean-Luc Picard, you must “make it so”; otherwise, it might take you a very long time to sell your house and the offers to buy will not only be slower, but lower. Clean, Clean, Clean Your best friend when cleaning your house for resale will be tri-sodium phosphate (TSP) or its equivalent. TSP is one of the home products that top the list of must-haves, and it’s not expensive. Roll up your sleeves, put on your rubber gloves and scrub your walls and ceilings, and anything else that needs your elbow grease. Unless you can afford professional cleaners, there’s no way out of this one. Carpet cleaning is another must and there are home products for the do-it-yourselfer or you can hire a cleaning company to take care of this job. If you have shabby rugs scattered throughout the house, forget cleaning them; it’s probably better to remove them altogether. There are home products to clean things that require special care ? ceramic tile, porcelain, stainless steel, wood cabinets, aluminum siding, etc., and you can find whatever you need at your neighborhood hardware store. Ask questions and read labels. When using commercial cleaning products, wear gloves and a mask. It’s wise to be careful. Paint for a Pristine Finish As thorough as your cleaning job is, it won’t have much impact on sagging, faded wallpaper, gouges in the walls, or cracked and peeling paint. Repainting is the solution, and interior painting jobs start with stripping off old wallpaper, attacking cracks and gouges with filler, and then getting to work with your roller and brush. This is also the time to do all the small repairs that need your attention: hammer in nails; repair the broken step; replace the broken glass. When selecting paint, the best colors for your walls and ceilings are white, off-white, cream, creamy off-white ? you get the picture. A light, cool, neutral color can fit into everyone’s decorating scheme. (You want that young couple to see your home as the perfect setting for their red plush love seats.) If you have recently painted one or more rooms in quite dramatic colors, leave them as they are. As long as the walls and trim are clean and fresh, prospective buyers won’t mind a bit of repainting if they want to change the colors ? the main thing is not to overwhelm them. If you need to paint the outside of your house, it’s not necessary to restrict yourself to neutral colors for exterior paint; however, a bright color is not a good choice. Something fairly subdued is better, but be creative when painting the front door; a dramatic touch might be needed to make your house memorable. It’s easy for a buyer to repaint a door if he or she doesn’t share your love of Christmas red or purple passion. Remove the Clutter It’s time to say goodbye to your high school chemistry notes, the clothes you outgrew five years ago, the playpen your twelve-year-old no longer needs, and everything else your family will never use again, read again, or wear again. Be tough! Do it! Take it to the dump; hold a garage sale; donate it to your favorite charity. Don’t let it take up any more of your storage space ? you’re going to need it all to store the things that are currently stacked on shelves and floors and cluttering up counter tops throughout the house. Important home products that can help you deal with this part of your preparation are closet organizers. They come in every size and style imaginable, and you are sure to find something suitable. When you have everything neatly stored in your closets and cupboards, walk through the house and pick up and put out of sight everything else on your counters and table tops that don’t need to be there. “Clutter-free” means clutter-free and it won’t kill anyone in the family to have to reach under the counter for the dishwashing detergent or the toothpaste for the next few days or weeks. You probably don’t think of furniture as “clutter,” but clutter is anything that unnecessarily crowds a room, a doorway, or a hall. If your home has very small rooms and you can manage without some furniture items for awhile, arrange to use a friend’s garage or basement to store them. It will “open up” the rooms and make your house appear larger and brighter, and that’s a good thing. Let There be Light Sunlight is a friend to the house seller, and you should try and let as much of it into the house as you can. Wash windows inside and out and wash or dryclean the window coverings: curtains, drapes, and blinds. Before showing the house to a prospective buyer, replace burned-out light bulbs, turn on the lights, open the windows, lift the blinds, and pull back the drapes. Final Touches Ask a non-smoking, non-pet-owning friend to come into your house when you have finished cleaning and painting. Are all the pet odors and smoking odors gone? If the house passes the sniff-test, place some potpourri in open dishes to add a fresh, clean scent; otherwise, get back to work. Finally, step outside and see what a prospective buyer’s first impression of your yard is likely to be. Mow the lawn, trim the hedges and bushes, weed the garden, edge the flowerbeds, and sweep and clean the walkway, deck, or patio. Your yard is another selling feature of your house, and must be clean and tidy, too. Home products can help make your house appear big, bright, clean, and ready for a prospective buyer to move right in, which is exactly what you want.
Chimney Cap Checklist: Four Quick Ways to Evaluate Your Existing Chimney Cap
November 30, 2008
While you are cleaning leaves out of your home’s gutters, dealing with Christmas lights, or adjusting a satellite dish, don’t forget to check on your chimney caps while you’re on the roof. Chimney caps are those mesh-sided enclosures (usually made of stainless steel, copper, or galvanized steel) atop your chimney to prevent water, animals, bird droppings, and leaves from entering your home. A once-a-year assessment of your chimney caps’ condition can be well worth your time for protecting your house. Here are four things you can easily check on your chimney caps:
1. Are the chimney caps there? If there have been high winds in your area, your chimney caps may have blown off. Properly secured chimney caps withstand most high winds, but exceptional winds can do damage, including blowing chimney caps off.
2. Are the chimney caps securely attached? Time, wild animals, or high winds can degrade the security of your chimney caps’ attachment to your flues or chimneys. You can retighten screws or reapply a sealant if your chimney caps are no longer securely attached.
Glass Sinks ? 4 Unbreakable Rules of Buying a Glass Vessel Sink
November 29, 2008
1. Know your sinks How durable are these sinks? These sinks are tempered. Tempered glass is regular glass that has been heated to a very high temperature, and then quickly cooled. This procedure strengthens the glass, making it 5-7 times stronger than regular glass.
Sink glass is fairly thick. Typical thicknesses range from ½ inch to ¾ inch. You can go about your normal grooming habits such as brushing your teeth, combing your hair, shaving, applying make-up, etc without worrying about breakage.
Like the look of these above the counter glass sinks, but don’t want glass? Consider a porcelain vessel sink. You’ll get the look without the worry.
2. Know your space The most popular bowl sinks are 15-20 inches in diameter, about the width of your keyboard. They’re about 5-8 inches deep, about the length from the base of your wrist to your ring or middle finger.
Make sure that you have the appropriate amount of space to accommodate the sink and accessories, plus maintain ample space away from the edge of the counter and the wall so that the "fear of leaning on it" factor is no longer a factor. 12-15 inches around the entire sink will do.
Lakeside Patios ? The Water Makes Decisions For You
November 28, 2008
If you are putting in a new patio on a lakeside, you have unique considerations that other homeowners do not have when it comes to purchasing patio furniture.
We built a new patio on a 700 acre lake and I had to look around for just the right outdoor furniture. It can get very windy on the lake so you don’t want furniture that will blow right into the water. That leaves out PVC, plastic, lightweight aluminum etc. My choices were wrought iron, or any of the hardwoods. Our lake is located in the North woods so I thought wrought iron would be too fancy. The look of scrolled wrought iron did not match our wide timber stairway leading down to the lake and patio. The timber stairs and trim are rustic cedar that fits our setting perfectly. Wrought iron would be lovely in a urban or suburban setting or backyard, but it just didn’t match our house. I don’t think wrought iron is very comfortable and not good for lounging on a lazy weekend. We entertain a lot and I wanted furniture that people would feel comfortable to sit around in and relax while enjoying the action on the water.
Top Ten Remodeling Tips
November 27, 2008
My husband and I just completed our first remodel. It was a period renovation of a Victorian Gingerbread Craftsman. (I’m so thrilled I can talk about it in the past tense). We haunted architectural salvage houses for just the right windows, bid on eBay for period-correct light fixtures, spent an entire afternoon driving all over L.A. for a screw that they stopped making in the thirties and generally worked to the point of insanity. Tiptoed up to the line but never crossed it.
So here, ripped from the headlines so to speak, are my Top Ten Tips for Remodeling. Read ‘em and weep.
1. There is a solution to every situation. But it’s not necessarily yours. You go where the solution is - it doesn’t come to you.
2. There is no medicine for whatever ails you quite like hard, exhausting, purposeful work.
3. Chew your own food. Don’t make your problems other peoples. They’ve got their own.
4. I’m not psychic. Maybe you are. Guesstimates of time and money are just that. Reality has a way of intruding. When in doubt - go with Reality. (I don’t know when I’m going to die either).
Home Automation Enhances Your Lifestyle and Saves Money - Exciting Home Automation Applications
November 25, 2008
Wouldn’t it be nice to have your home take care of things for you, automatically, without you having to lift a finger? You bet it would. That is the promise of home automation. There are many different systems, especially in larger homes, that can benefit from being integrated. Some of these systems include security alarm, HVAC, audio / video, and lighting. Home automation integrates these systems together, enabling them to function more efficiently, improve functionality, conserve resources and enhance your lifestyle.
That’s the name of the game; an enhanced lifestyle. Everyone can benefit from a better life and modern electronic systems can help provide it. In addition, as the cost of resources continues to rise and the price of electronics continues to fall, home automation systems will prove to be even more cost effective. The combination of the modern consumer’s thirst for convenience and increasing economic advantages will propel home automation more into the mainstream.
So, what are some of the fun things a home automation system can do for you? Here are some common applications:
Making a Pen with Your New Wood Lathe
November 25, 2008
So you just purchased a wood lathe but do not know what kind of project you should start out with. As soon as the right amount of skill is obtained, beautiful pieces of woodwork can be created with a wood lathe. However, before you get too over your head, it is best to start out with a basic woodturning project. My recommendation would be beginning by carving your very own pen.
Pen turning is a common hobby or past time. These homemade pens can make excellent gifts for any event. Pen turning is a fun yet practical project that can help you get a taste of the capabilities of your wood lathe. The following are some tips in preparing your wood for the lathe that will help you make your first wood lathe experience successful.
1. Pick an interesting wood blank. One of the great things about pen turning is you can use any sort of wood you want, including scrap pieces from other projects. Pick out a piece of wood with interesting figuring. Be aware that some wood changes appearance with light and air exposure and will begin to look dull with time, such as Paduak or Purple Heart wood. If you are not comfortable using a scrap piece of wood there are numerous wood blanks that can be purchased in all sorts of exotic woods.
Imported Tools vs. Brand Name - Are They As Good?
November 24, 2008
So you are looking for hand or power tools on the Internet or in a “brick & Mortar” tool store, and you keep running into tools imported from China, Taiwan, Korea, Germany and various other countries. A lot of these tools seem to be priced well under the comparable “name brand” tools you are used to? are they as good or better, or are they just cheap knockoffs.
A larger percentage of these tool deserve a better look, they are in many cases as good as, or better, and usually a very good bargain when compared side by side with their “brand name” counterparts.
In the last few years the quality of tools produced in many of the Asian countries has increased significantly…they are no longer the “knuckle busters” of the past. This is really the same path that the Japanese tool producers followed in the sixty’s and seventies, we all recall the rather poor quality of Japanese products coming to the US…cars, tools, electronics were all of dubious value. As these producers learned more about our market, our expectations and started making money…the quality of what they produced and offered for sale became very good. Today many of the products from Japan rival the quality of anything produced anywhere in the world.
What to Look For in a Drill Press
November 23, 2008
A drill press, also known as a pillar drill, is the stationary form of a hand-held drill. The advantage of the drill-press over the hand drill is the tool’s accuracy and power. A drill press is a very valuable tool with several different types and models of drill presses to choose from. Here are a few things to consider when purchasing your own drill press.
Floor vs. Bench-Top Model
A floor model is set directly on the floor while the bench-top model of a drill press is set on a table top. The floor models are typically better buys with more accessories and attachments and are able to handle larger projects than the bench-top models. The floor model is always a good pick unless you are looking for something that is a bit more compact to save space for a smaller shop.
Multiple Spindle Speeds
If you plan on using your drill press for woodwork and metalwork, it is important that your drill press has several speeds to suit the project you are doing. When working with metal you will want to use lower speeds while wood projects need to be in the medium to high range of speeds. For maximum versatility, look for a drill press that can operate between 500-4,000 RPM (a machine that only reaches to 2,000 is suitable if you will only be using it for drilling and not for other projects).
Choosing a Home Builder
November 21, 2008
So you’ve decided to build a new home. Like many home buyers you realize that buying a new home offers a wide range of advantages over buying an existing home. You are getting exactly what you want, demanding the highest quality construction, as well as learning how to operate and maintain your home’s systems and equipment. You’re also developing a relationship with the builder. Congratulations on making a great choice, however, you still have a big decision left to make.
What kind of home builder is right for you? Should you go with a production builder who builds many homes at a time, or do you want a custom home with a distinctive style and features unique to you?
Production home builders typically tend to use stock plans, but often have a variety of options from which to choose. They will tend to build on land they own and build for a wide range of price points. They are generally high volume builders with many builders completing over 200 homes a year.
Custom home builders typically build fewer than 20 homes a year and work to create one-of-a-kind homes. Many of these homes are site specific on either land owned by the builder or on land you already own. They may offer design/build services and usually build higher end homes.
